Leaves on grass under a tree with a view across a field to trees in the distance

Don't Throw Away Those Autumn Leaves

I don’t know if there is any link to the season you were born in as to the season you prefer… it’s possibly just an urban myth. Many people like the russet hues of autumn leaves - golds, yellows and reds. Leaves are lovely when crunchy but with rains and the damp of autumn and winter increasing the joy of walking through crisp, crunchy leaves no longer applies. Paths, steps and pavements become slippery and increasingly dangerous. Reductions in local council budgets see less frequent removal.

So what to do with a plant resource delivered to our doorsteps? As with all parts of plants and trees, leaves rot down in a similar way to compost, and so can be a useful free resource with low transportation costs.

Leaves break down at different rates. For example holly keeps it’s shape for a long time due to its waxy surface, whereas the softer leaves from ash, maple and cherry will decompose at a much faster rate. While we can add small quantities to our compost heaps, there are so many leaves to collect at this time of year we need to find alternative methods to make use of this natural resource. Leaf mould is relatively easy to make as it is a slow process of decomposition only requiring some moisture and enough air to stop it becoming too wet. Put it in a shady place and leave it for 1-2 years, possibly more, until it is broken down for the use you require.

Uses of leaf mould

Young leaf mould - about a year old can be used on beds and borders as a soil improver or to mulch round the base of plants to conserve moisture. This can add structure, some nutrients and improves moisture retention in the soil.

Older leaf mould - two years or more can be sieved and used as a seed sowing compost and added to other potting mixtures.

How to create leaf mould

Bin bags

In small spaces leaf mould can be created using a tough bin bag or empty multipurpose compost bag. Fill with a mixture of leaves. Either  a mixture of soft leaves such as cherry, willow, ash or hard leaves such as beech, oak, holly, magnolia, rhododendron, photinia and laurel. The hard leaves will break down faster if shredded. This can be done using a lawnmower if you have one. The addition of small amounts of grass clippings can also improve the decomposition of the leaves.

A green bin bag containing dark brown magnolia leaves

Once the bag is about three quarters full moisten the leaves if they are dry and loosely tie off the top of the bag. Make small holes using a garden fork or point of scissors in the sides and base of the bags to aid aeration of the leaves.

Chicken wire holders.

This style of process is more suitable for larger gardens where there may be space, and if you have bigger volumes of leaves. These can be created using chicken wire attached to sticks or posts. These are more open than bin bags and are best not compacted as this allows for air circulation. Again the process needs some moisture and the open sides keep the pile aerated. Some kind of protection, such as a board or plastic sheet on the top will protect from saturation in the winter months or in very dry spells helps prevent the pile drying out.

Once created in a shady spot, leave the leaves to do their own thing. Check in hot weather and add water if needed, otherwise leave until at least a year before use.

Golden yellow leaves on a grey pavement




Back to blog